building the pager

finished

hardware · prototype v0

Pager

A pocket device for messages and the web: a Raspberry Pi Zero 2 W, a daylight-readable screen, and a real keyboard, in a case you can print. Wi-Fi first; 4G comes next.

The case is designed but not yet test-fitted. Sizes marked ≈ are estimates until the parts are measured.

Build it

Parts

Each link goes to the part’s maker or to a shop that lists it. Stock and prices change, and small makers sell out: check the listing is the same part before you order.

Print it

No printer? Upload the two 3MF files to an online 3D printing service such as Craftcloud, JLC3DP or Xometry; they print the shells and post them to you. Ask for PLA or PETG at 0.2 mm layers.

In New York, print it yourself at MakerSpace NYC in the Brooklyn Army Terminal, or at the NYC FIRST STEM Center in the New York Public Library’s Washington Heights branch. Check hours and access before you go.

The case is designed in code (build123d) and every size can be changed: the source is in the site’s repository under 3d/pager.