building the pager
finished
hardware · prototype v0
Pager
A pocket device for messages and the web: a Raspberry Pi Zero 2 W, a daylight-readable screen, and a real keyboard, in a case you can print. Wi-Fi first; 4G comes next.
The case is designed but not yet test-fitted. Sizes marked ≈ are estimates until the parts are measured.
Build it
Parts
- Raspberry Pi Zero 2 Wthe computer: Wi-Fi, Bluetooth, Linux65 × 30 mmRaspberry Pi’s own page sends you to an approved seller for your country. The plain board has no header pins; the “WH” version has them soldered on.Raspberry Pi (opens in a new tab)
- Sharp memory LCD 2.7" 400×240 (Adafruit 4694)screen: sharp in daylight, sips power58.8 × 35.3 mm viewableAdafruit makes it and often runs out; DigiKey sells the same board (its part 1528-4694-ND), and The Pi Hut ships from the UK.DigiKey (opens in a new tab)Adafruit (opens in a new tab)The Pi Hut (opens in a new tab)
- BlackBerry Q20 keyboard + trackpad modulekeys, and a trackpad for pointing≈ 66 × 45 mm boardSolder Party’s “BB Q20 Keyboard with trackpad, USB/I2C/PMOD”. It sells out; check both.Solder Party on Tindie (opens in a new tab)Lectronz (opens in a new tab)
- PiSugar 3 battery boardcharging, power button, battery gauge≈ 65 × 30 mmThe one for the Pi Zero, not the larger “Plus”. It comes with a 1,200 mAh cell of its own.PiSugar on Tindie (opens in a new tab)
- LiPo cell, 103450 sizethe batteryup to 51 × 34.5 × 10.2 mmA 2,000 mAh cell, the size the case’s bay is cut for, in place of the smaller one the PiSugar comes with. Sellers fit different plugs (JST PH 2.0 or JST 1.25): get the one that matches the battery board, and a cell with its own protection circuit.OpenELAB (opens in a new tab)ameriDroid (opens in a new tab)
- 4 × M2 × 14 self-tapping screwsclose the shellsPan head, for plastic. Any hardware seller’s will do.Homediyer (opens in a new tab)
- 4 × M2.5 × 8 machine screwshold the Pi stackPan head. Any hardware seller’s will do.DigiKey (opens in a new tab)
- microSD card, 16 GB or morethe Pi’s diskRaspberry Pi (opens in a new tab)
Each link goes to the part’s maker or to a shop that lists it. Stock and prices change, and small makers sell out: check the listing is the same part before you order.
Print it
No printer? Upload the two 3MF files to an online 3D printing service such as Craftcloud, JLC3DP or Xometry; they print the shells and post them to you. Ask for PLA or PETG at 0.2 mm layers.
In New York, print it yourself at MakerSpace NYC in the Brooklyn Army Terminal, or at the NYC FIRST STEM Center in the New York Public Library’s Washington Heights branch. Check hours and access before you go.
The case is designed in code (build123d) and every size can be changed: the source is in the site’s repository under 3d/pager.